Argo Analyzer 4.3
Veolia Water Technologies & Solutions
Report for:
Hypersperse Antiscalant Projection
Dose Projection and Product Selection Summary
Selected Product : Hypersperse MDC776
Required Dosage : 8.28 mg/l
Project Data Summary
| Plant Data | |
| Designed By | |
| Plant Name | |
| Designed for total permeate flow | 675 m3/hour |
| Water Source | Unknown |
| Membrane Type | |
| Acid is not used to control the feed pH | |
| No organic coagulant is used in the pretreatment | |
| Recovery | 70 |
| Recommended Dose of Hypersperse MDC776 | 8.28 mg/l |
| Feed pH | 7.56 |
| Feed Temperature | 15 deg C
|
| Water Quality Data | |||
| Ion | Raw Feed | Brine | Unit |
| Calcium | 87.00 | 290.01 | ppm |
| Magnesium | 15.80 | 52.67 | ppm |
| Sodium | 8.00 | 4237.93 | ppm |
| Potassium | 3.00 | 10.00 | ppm |
| Iron | 0.03 | 0.10 | ppm |
| Manganese | 0.01 | 0.03 | ppm |
| Barium | 9.30 | 31.00 | ppm |
| Strontium | 0.00 | 0.00 | ppm |
| Aluminium | 0.02 | 0.07 | ppm |
| Chloride | 1871.00 | 6236.67 | ppm |
| Sulphate | 26.29 | 87.63 | ppm |
| Bicarbonate | 365.00 | 1216.67 | ppm |
| Nitrate | 15.69 | 52.30 | ppm |
| Fluoride | 0.60 | 2.00 | ppm |
| Silica | 26.50 | 88.33 | ppm |
| Phosphate | 0.00 | 0.00 | ppm |
| TDS | 2428.24 | 12305.41 | ppm |
| CO2 | 16.45 | 16.44 | ppm |
| pH | 7.56 | 8.08 | |
| CCPP | 11.87 | 316.07 | ppm CaCO3 |
| S&DI | -0.02 | 1.28 | |
| Ionic Strength | 0.04 | 0.21 |
|
| Calculation Results | |||
| Calculations based on use of Hypersperse MDC776 | |||
| CCPP | LSI | % of Max | |
| Calcium Carbonate | 316.07 | 1.28 | 8.85 |
| Saturation | % of Max | ||
| Calcium Sulphate | 0.0x | 8.0x | 0.16 |
| Barium Sulphate | 112.0x | 135.0x | 82.95 |
| Strontium Sulphate | 0.0x | 35.0x | 0.00 |
| Calcium Fluoride | 0.5x | 13000.0x | 0.00 |
| Calcium Phosphate | 0.0x | 12.0x | 0.00 |
| Brine Conc | Limit | % of Max | |
| Iron | 0.10 | 0.7 | 14.29 |
| Manganese | 0.03 | 0.5 | 6.67 |
| Aluminium | 0.07 | 0.4 | 16.67 |
| Silica | 88.33 | 125.0 | 70.67
|
Degrees of Saturation in Concentrate as %
| Saturation | CaCO3 | CaSO4 | BaSO4 | SrSO4 | CaF2 | Fe | Mn | Al | SiO2 | CaPO4 |
| No Inhibitor | 120 | 1.25 | 120 | 0 | 46.36 | 100 | 33.33 | 66.67 | 70.67 | 0 |
| With Hypersperse MDC776 | 8.85 | 0.16 | 82.95 | 0 | 0 | 14.29 | 6.67 | 16.67 | 70.67 | 0 |
Find a contact near you by visiting www.watertechnologies.com and clicking on “Contact Us”
* Trademark of Veolia Water Technologies & Solutions; may be registered in one or more countries. ©2022 Veolia. All rights reserved.
11/3/2023
70% Recovery, Hypersperse MDC776
Treatment & System Summary
Membrane Manufacturer:
Membrane Model Code :
Feed Flow :964.29 m3/hour
Brine Flow :289.29 m3/hour
Recovery :70 %
Selected Product :Hypersperse MDC776
Feed Dosage :8.28 ppm
Concentrate Dosage :27.61 ppm
Please note that the dosage provided is only an indication and needs to be validated by a Veolia expert.The foregoing recommendations are given in
good faith and are based on the analytical and operation data you have entered, and on application data which we believe to be correct.No warranty as
to specific application is expressed or implied since conditions of use and other contributory factors are beyond our control Please seek advice from
your Veolia membrane chemicals specialist with regard to any particular query.
If you have questions or concerns about the use or distribution of Argo Analyzer please contact your regional Veolia representative.
Find a contact near you by visiting www.watertechnologies.com and clicking on “Contact Us”
* Trademark of Veolia Water Technologies & Solutions; may be registered in one or more countries. ©2022 Veolia. All rights reserved. 11/3/2023
