KlarAid* PC1195

KlarAid* PC1195

Efficient, economical to use
Forms a dense, easily dewatered sludge
Little or no need for pH adjustment
Performs in prechlorinated systems
Forms faster settling floc

description and use

KlarAid PC1195 is a strongly cationic, low to medium molecular weight liquid coagulant. It is designed to function in a total veolia treatment programme as a primary coagulant for the removal of colloidal turbidity from industrial wastewaters and surface waters. The unique polyelectrolytes combine high charge density with a higher molecular weight producing a large, faster settling floc. KlarAid PC1195 is ideal for use in a wide range of coagulation applications requiring a rapid forming, fast settling floc.

typical applications

KlarAid PC1195 produces excellent quality water in raw water clarification systems and lime softening programmes.

Clarification systems applying KlarAid PC1195 often

find riendourgcaendicslucdogaegvuolalutmione dosage is decreased or eliminaactoemd preascut,lteiansgiliyn:dewatered sludge

improved heat transfer due to decreased metal carryover
elimination or reduction of pH adjustment chemicals since coagulation with KlarAid PC1195 is not pH dependent

KlarAid PC1195 is also recommended for direct or in- line filter application of low turbidity waters.

KlarAid PC1195 is successful in dewatering many different types of industrial sludges. It is a proven product in oil/water separations promoting clean breaks in various types of separation equipment including dissolved air flotation units, induced air flotation units and API separators. Oily wastewaters from the automotive, steel and hydrocarbon processing industries respond well to treatment with this product.

Water Technologies & Solutions fact sheet

Solids capture is increased and cleaner filtrate is discharged.

treatment and feeding requirements

KlarAid PC1195 is miscible with water in all dilutions, and, therefore, may be diluted to any ratio desired to meet the chemical feed capacity.

For optimum product distribution, it should be diluted to a 10% or less solution with clear water. This product may also be applied neat (undiluted) to an area of high turbulence. For best results, this product should be applied at a point where vigorous agitation is assured, such as the suction side of a water or wastewater pump.

Avoid using mild steel, copper, aluminium or other alloys for feeding concentrated KlarAid PC1195. Corrosion resistant materials of construction such as PVC, polyethylene or stainless steel are recommended.

Proper treatment levels for KlarAid PC1195 depend on many factors such as severity of the problem and conditions particular to a given installation. The product is to be used in accordance with

control procedures veolia establishes for a specific application.

general properties

Physical properties of this product are shown on the Material Safety Data Sheet, a copy of which is available on request.

packaging information

KlarAid PC1195 is available in a wide variety of customised containers and delivery methods. For more information please contact your veolia representative.