Water Technologies & Solutions fact sheet
- Reduces sludge volume
- Efficient and economical
- Forms faster settling floc
- Little or no need for pH adjustment
- Performs in pre-chlorinated systems
- Forms a dense, easily dewatered sludge
- Improves heat transfer by decreasing metal carryover
- Certified by NSF International to NSF/ANSI Standard 60 (maximum use rate of 10 mg/L)
description and use
KlarAid PC1194 is a strongly cationic, low molecular weight, liquid coagulant. It is designed to function in a total VEOLIA treatment program for the removal of colloidal material from industrial waste and surface waters. KlarAid PC1194 is ideal for use in a wide range of coagulation applications requiring a fast settling floc.
KlarAid PC1194 is a proven product in oil/ water separations, promoting clean breaks in various types of separation equipment, including dissolved air flotation units, induced air flotation units, and API separators. Oily wastewaters from the steel, automotive, and hydrocarbon processing industries respond well to treatment with this product.
KlarAid PC1194 produces excellent quality water in raw water clarification systems and lime softening programs. The need for commodity inorganic coagulants is reduced or eliminated resulting in reduced sludge volume, easily dewatered sludge, and decreased consumption of chemicals used for pH adjustment.
Application of KlarAid PC1194 in dewatering many different types of industrial sludges, including paper industry sludges, results in cleaner filtrate and improved solids capture.
treatment and feeding requirements
KlarAid PC1194 is miscible with water in all dilutions and may be diluted with good quality water to any ratio to meet the chemical feed pump capacity. For optimal product distribution, it should be diluted to 10 percent or less with clean water. The product may also be applied neat (undiluted) to an area of high turbulence. For best results, KlarAid PC1194 should be applied at a point where vigorous agitation is ensured, such as the suction side of a water/wastewater pump.
KlarAid PC1194 is compatible with a wide range of materials including PVC, incalloy, and Teflon (Teflon is a registered trademark of DuPont). Consult your VEOLIA representative for more information in the selection of tanks, piping, and fittings.
Physical properties of KlarAid PC1194 are shown on the Material Safety Data Sheet (MSDS), a copy of which is available on request.
KlarAid PC1194 is a liquid product, available in a variety of containers. Consult your VEOLIA representative for delivery and packaging alternatives.
storage and handling
Store KlarAid PC1194 at moderate temperatures of 40 to 90°F (4 to 32°C), and protect from freezing. If frozen, thaw and mix thoroughly prior to use.
An MSDS containing detailed information about this product is available on request.
Find a contact near you by visiting www.veoliawatertechnologies.com and clicking on “Contact
Us.” *Trademark of VEOLIA; may be registered in one or more
©2017 VEOLIA. All rights reserved.