Skip to content Skip to footer

OptiSperse* PO5083 minimizes corrosion and improves boiler reliability

OptiSperse* PO5083

minimizes corrosion and improves boiler reliability

Water Technologies & Solutions fact sheet

description and use

OptiSperse PO5083 is a liquid inorganic phosphate manufactured to VEOLIA specifications. It is designed for the control of corrosion in high- pressure boiler systems on coordinated phosphate/ pH programs.

typical applications

Corrosion control in sub-critical boilers is usually achieved by using a coordinated phosphate/pH program. The use of OptiSperse PO5083 will supply a phosphate with a low (acidic) Na/PO4 ratio for such a treatment program. It is supplemented with other products to control deposition and corrosion throughout the steam generation system.

treatment and feeding requirements

Feed OptiSperse PO5083 continuously to the boiler steam drum via a separate stainless steel chemical feed line. Sufficient OptiSperse PO5083 should be fed to maintain the recommended boiler water phosphate residuals and Na/PO4 ratio. Residuals will depend on operating pressure.

Use good quality condensate, demineralized water or feedwater to make a recommended maximum 5% solution by weight of the product. Agitation should be provided.

All chemical feeding equipment and feed lines should be of 304 or 316 stainless steel materials due to the low pH of the material. To minimize packing and plunger problems, a diaphragm pump is recommended.

packaging information

OptiSperse PO5083 is a liquid product and is available in a wide variety of customized containers. Contact your local VEOLIA representative for details

safety precautions

A Material Safety Data Sheet containing detailed information about this product is available on request.

Find a contact near you by visiting www.veoliawatertechnologies.com and clicking on “Contact Us.”

*Trademark of VEOLIA; may be registered in one or more

©2017 VEOLIA. All rights reserved.

countries.

FS1359EN.docx Jun-06