OptiGuard* MCP600
- Unique liquid formulation provides complete boiler treatment in a single product
- Program balance is excellent for systems without a deaerator
- Contains a blend of highly effective polymeric dispersants for superior control for deposit formation
- Balanced neutralizing amine blend provides effective system-wide condensate protection
OptiGuard MCP600 is an advanced, multicomponent formulation which includes a unique dispersant blend, oxygen scavenger, an internal sludge conditioning agent, and a blend of neutralizing amines. It provides a complete boiler system treatment in a single, easily fed liquid concentrate.
The unique blend of polymers in OptiGuard MCP600 is highly effective in preventing the formation of both hardness and metal oxide deposits. This results in significantly reduced scale potential and cleaner heat transfer surfaces.
OptiGuard MCP600 has a sludge conditioning agent which removes calcium hardness from the boiler water as calcium phosphate and magnesium hardness as magnesium hydroxide and/or magnesium silicate. The sludge conditioning agent and polymeric dispersants combine to inhibit the growth of crystalline particles and promote the formation of a non-adherent sludge which is removed by blow-down. OptiGuard MCP600 also contains a highly effective oxygen scavenger to control oxygen corrosion in the preboiler and boiler systems.
OptiGuard MCP600 is formulated so that it is particularly effective in controlling dissolved oxygen corrosion in systems which do not have a deaerator. If a day tank is used, the day tank should be covered for best scavenging results.
OptiGuard MCP600 contains a blend of neutralizing amines with selected stability and volatility characteristics. When fed to the boiler, the amines rapidly volatilize with the steam and prevent corrosion by neutralizing carbonic acid in the condensate. The unique characteristics of this amine blend provide controlled protection at points of initial condensation and in extended areas of complex condensate systems. This reduces corrosion of both iron and copper alloys, which extends equipment life and increases the efficiency of heat exchange equipment.
OptiGuard MCP600 is approved for use in FDA- regulated plants where steam is used for sterilization or where it contacts food or food products. It is also approved per NSF-USDA G6. It is not approved for use in systems where the steam contacts milk or milk products.
Treatment and Feeding Requirements
Proper treatment levels for OptiGuard MCP600 depend on many factors particular to a given installation. The product should be used in accordance with control procedures that Veolia establishes for a specific application.
OptiGuard MCP600 may be fed neat or diluted to any convenient strength with softened make-up, condensate or feedwater tank, or hot well.
OptiGuard MCP600 is a liquid blend and is available in a wide variety of packaging types. Contact your local Veolia representative for details.
WATER TECHNOLOGIES
*Trademark of Veolia; may be registered in one or more countries. ©2022 Veolia. All rights reserved. E-PFbOptiGuardMCP600_EN.docx Mar-19
OptiGuard MCP600
Store OptiGuard MCP600 at moderate temperatures and protect from freezing. If frozen, thaw completely and mix thoroughly prior to use. Exposure to atmospheric oxygen should be minimized.
A Material Safety Data Sheet containing detailed information about this product is available on request.
Veolia Water Technologies
Please contact us via:
www.veoliawatertechnologies.com
